Almost Plug and Play. For step 1 and 2 ( 4 ) you will Need less than 1 hour with experience in soldering .
1.st Step:
The Box with the male and female connectors easy plug in between the main harness and the Front Turn Assy
( 100784 FRT TURN/SlDE LP ASSY Part 17
http://www.delorean.eu/catalog/index.php?cPath=19_26_60 )
The Connectors are 1:1 like the original 3Pin.
2nd Step:
Remove the H4 Lamps and install the yellow Wires to the Sidemarkers.
Cut off the Red Wire and sold the yellow wire . ( See the attached Images )
Install the H4 Lamps.
-> Now the yellow Siedemarkers will Flash when the Headlights are ON.
3rd Step ( Optional )
Every Box get a White Cable.
Install the White Cable on "Ignition" ( " 15" ) and the Sidemarkers will Flash when the HEadlights are on OR OFF.
It is an Option, so the Function is always active
In Moment i´m planning to make a 4th Step:
The Boxes will get a second function: Install a Mass Cable ( Black , 0V ) from the Boxes and you can Switch the Mass Cable on Ground
of the Car ( using a simple Switch ) and you can decide if the First Position of the Light Switch ( "Standlicht" in German, "Sidelights in English ? )
will be in the "US Style" ( FRT TURN/SlDE LP ASSY is yellow lightning ) OR the small Bulb in the H4 Lights are on.
I can send a pdf with a small install guide . Please send a PN with your email if you re interested.
Kind Regards Sebastian